Checking Gear Housing Movement
WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Check the movement of steering gear housing during stationary steering on a dry paved surface.
- Apply a force of 49 N (5 kg-f, 11 lb-f) to steering wheel to check the gear housing movement. Turn off ignition key while checking.
Movement of gear housing: ±2 mm (±0.08 in) or less
- Apply a force of 49 N (5 kg-f, 11 lb-f) to steering wheel to check the gear housing movement. Turn off ignition key while checking.
- If movement exceeds the limit, replace or repair as necessary.