LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2102 (Body, Lock & Security System) >> Trunk Lid And Fuel Filler Lid Opener >> Removal and Installation of Trunk Lid Lock >> Lock Removal

Lock Removal

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the trunk lid finisher. Refer to "TRUNK ROOM TRIM & TRUNK LID FINISHER ".
  2. Disconnect the release cable.
  3. After disconnecting the harness connector, remove the bolts and the trunk lid lock.
    Fig 1: Trunk Lid Lock Bolts With Torque Specifications
    G04916913Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals