Removal and Installation of Trunk Lid Assembly

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Trunk Lid Assembly Bolt With Torque Specifications

Courtesy of NISSAN MOTOR CO., U.S.A.

Remove the trunk lid finisher. Refer to "TRUNK ROOM TRIM & TRUNK LID FINISHER ".
Remove the trunk lid wire harness.
Remove the bolts and the trunk lid assembly.
CAUTION: After installing, apply touch-up paint (body color) to the head of the hinge bolts.

Installation is in the reverse order of removal.