LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2102 (Body, Lock & Security System) >> Door >> Fitting Adjustment >> Rear Door >> Longitudinal clearance and surface height adjustment at front end

Longitudinal clearance and surface height adjustment at front end

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the center pillar upper garnish. Refer to "REMOVAL AND INSTALLATION ".
  2. Accessing from inside the vehicle, loosen the nuts. Open the rear door, and raise the rear door at rear end to adjust.
  3. Install the center pillar upper garnish. Refer to "REMOVAL AND INSTALLATION ".
scientia non olet · About LEMON Manuals