LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2101 (Exterior & Interior) >> License Lamp Finisher >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove trunk lid finisher. Refer to "TRUNK ROOM TRIM & TRUNK LID FINISHER ".
  2. Remove license lamp finisher nuts and release clips.
  3. Disconnect trunk opener request switch connector, then remove license lamp finisher.
scientia non olet · About LEMON Manuals