LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2100 (Maintenance) >> Engine Maintenance >> Drive Belts >> Tension Adjustment >> Generator and Air Conditioner Compressor Belt

Generator and Air Conditioner Compressor Belt

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove engine undercover.
  2. Loosen idler pulley lock nut (A) and adjust by turning adjusting bolt (B).
    • For specified belt tension, refer to "DRIVE BELTS ".
  3. Tighten lock nut (A) to specification.
  4. Tighten adjusting bolt (B) to specification.
    Fig 1: Checking Generator And Air Conditioner Compressor Belt
    G04904573Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals