Inner Diameter of Piston Pin Hole

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Measure the inner diameter of piston pin hole "dp".
Standard diameter "dp"

Grade No. 0: 21.989 - 21.995 mm (0.8657 - 0.8659 in)

Grade No. 1: 21.995 - 22.001 mm (0.8659 - 0.8662 in)

Fig 1: Checking Inner Diameter Of Piston Pin Hole

Courtesy of NISSAN MOTOR CO., U.S.A.