CAN Diagnostic Support Monitor: TCM
WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
0: Error at present, 1 - 39: Error in the past (Number means the number of times the ignition switch is turned OFF→ON)
TCM REFERENCE CHART
| SELECT SYSTEM | CAN DIAG SUPPORT MNTR | Description | Normal | Error | ||||
|---|---|---|---|---|---|---|---|---|
| PRSNT | PAST | PRSNT | PAST | |||||
| TRANSMISSION | TRANSMIT DIAG | Signal transmission status | OK | OK or 1 - 39(1) | UNKWN | 0 | ||
| ECM | Signal receiving status from the ECM | |||||||
| VDC/TCS/ABS | Signal receiving status from the ABS actuator and electric unit (control unit) | |||||||
| METER/M&A | Signal receiving status from the unified meter and A/C amp. | |||||||
| BCM/SEC | Not used even though indicated | |||||||
| ICC | ||||||||
| e4WD | ||||||||
| AWD/4WD | ||||||||
|
||||||||