Models with VDC
WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
Models with VDC REFERENCE CHART
| ITEM | CAN DIAG SUPPORT MNTR | Description | Normal | Error |
|---|---|---|---|---|
| PRSNT | ||||
| ABS | INITIAL DIAG | Status of CAN controller | OK | NGCaution |
| TRANSMIT DIAG | Signal transmission status | UNKWN | ||
| ECM | Signal receiving status from the ECM | |||
| TCM | Signal receiving status from the TCM | |||
| METER/M&A | Not used even though indicated. | |||
| STRG | Signal receiving status from the steering angle sensor | OK | UNKWN | |
| ICC | Not used even through indicated | |||
CAUTION:
Never replace the unit even when "NG" is indicated on the "INITIAL DIAG" at this stage. Follow the trouble diagnosis procedures.