Inspection with CONSULT-III (Self-Diagnosis)

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: If a CONSULT-III is used with no connection of CONSULT-III CONVERTER, malfunctions might be detected in self-diagnosis depending on which control unit(s) carry out CAN communication.

SELF-DIAGNOSIS RESULT CHECK

Connect CONSULT-III and select "IPDM E/R" on the "Select System" screen.
Select "SELF-DIAG RESULTS" on the "SELECT DIAG MODE" screen.
Check display content in self-diagnosis results.

SELF-DIAGNOSIS RESULTS CHART

CONSULT-III Display	CONSULT-III display code	TIME		Details of diagnosis result
CONSULT-III Display	CONSULT-III display code	CRNT	PAST	Details of diagnosis result
NO DTC IS DETECTED. FURTHER TESTING MAY BE REQUIRED.	-	-	-	No malfunction
CAN COMM CIRC	U1000	X	X	Any of items listed below have errors: TRANSMIT DIAG ECM BCM/SEC

NOTE: The Details for Display for the Period are as follows:

Crnt: Error Currently Detected By Ipdm E/R.
Past: Error Detected In The Past And Stored In Ipdm E/R Memory.

Contents displayed

NO DTC DETECTED. FURTHER TESTING MAY BE REQUIRED: Inspection End.

CAN COMM CIRC: Print out the self diagnosis results and refer to "TROUBLE DIAGNOSIS ".