LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2092 (Power Supply, Ground & Circuit Elements) >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> CONSULT-III Function (IPDM E/R) >> Data Monitor >> Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
  2. Touch "ALL SIGNALS", "MAIN SIGNALS" or "SELECTION FROM MENU" on the "DATA MONITOR" screen.
    SIGNAL REFERENCE CHART

    ALL SIGNALS All signals will be monitored.
    MAIN SIGNALS Monitors the predetermined item(s).
    SELECTION FROM MENU Selects and monitors individual signal(s).
  3. Touch "START".
  4. When "SELECTION FROM MENU" is selected, touch items to be monitored. When "ALL SIGNALS" is selected, all the items will be monitored. When "MAIN SIGNALS" is selected, predetermined items are monitored.
  5. Touch "RECORD" while monitoring to record the status of the item being monitored. To stop recording, touch "STOP".
scientia non olet · About LEMON Manuals