Removal and Installation for Expansion Valve: Installation
WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
Installation is in the reverse order of removal.
Expansion valve mounting bolts: 2.9 - 5.0 N.m (0.29 - 0.51 kg-m, 26 - 44 in-lb)
CAUTION:
- Replace the O-rings with new ones, then apply compressor oil to them when installing them.
- After charging refrigerant, check for leaks. Refer to "CHECKING FOR REFRIGERANT LEAKS ".