LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2090 (Continuously Variable Transmission (CVT)) >> Differential Side Oil Seal >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove drive shaft assembly. Refer to "FRONT DRIVE SHAFT ".
  2. Remove differential side oil seals using suitable tool.
    CAUTION: Do not scratch transaxle case or converter housing.
    Fig 1: Removing Differential Side Oil Seal
    G04889137Courtesy of NISSAN MOTOR CO., U.S.A.