LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2050 (Roof) >> Sunroof >> Adjustment >> Gap Adjustment

Gap Adjustment

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

If a gap or minor height difference between glass lid assembly and roof panel is found, adjust in the following manner:

  1. Open sunshade assembly and tilt glass lid assembly up.
  2. Loosen glass lid assembly screws (2 each on left and right sides), then tilt glass lid assembly down.
  3. Manually adjust glass lid assembly from outside of vehicle so it is within specification "A-A" as shown.
  4. After adjustment, tilt glass lid assembly up and tighten screws.
  5. Tilt glass lid assembly up and down several times to check that it moves and seals properly.
scientia non olet · About LEMON Manuals