Display Item List
WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
DISPLAY ITEM LIST - SELF-DIAGNOSIS RESULTS
| CONSULT-II display | Item | Malfunction is detected when... |
|---|---|---|
| CAN COMM CIRC [U1000] | CAN communication | Malfunction is detected in CAN communication. |
| SEAT SLIDE [B2112] | Seat slide motor | When any manual and automatic operations are not performed, if any motor operations of seat slide is detected for 0.1 second or more, status is judged "Output error". |
| SEAT RECLINING [B2113] | Seat reclining motor | When any manual and automatic operations are not performed, if any motor operations of seat reclining is detected for 0.1 second or more, status is judged "Output error". |
| SEAT LIFTER FR [B2114] | Seat lifting FORWARD motor | When any manual and automatic operations are not performed, if any motor operations of seat lifting FORWARD is detected for 0.1 second or more, status is judged "Output error". |
| SEAT LIFTER RR [B2115] | Seat lifting BACKWARD motor | When any manual and automatic operations are not performed, if any motor operations of seat lifting BACKWARD is detected for 0.1 second or more, status is judged "Output error". |
| ADJ PEDAL MOTOR [B2117] | Pedal adjust motor | When any manual and automatic operations are not performed, if motor operation of pedal is detected for 0.1 second or more, status is judged "Output error". |
| ADJ PEDAL SENSOR [B2120] | Pedal adjust sensor | When pedal adjust sensor detects 0.5V or lower, or 4.5V or higher, for 0.5 seconds or more. |
| DETENT SW [B2126] | Park SW | With the A/T selector lever in P position (park position switch OFF), if the vehicle speed of 7 km/h (4 MPH) or higher was input the park position switch input system is judged malfunctioning. |
| UART COMM [B2128] | UART communication | Malfunction is detected in UART communication. |
NOTE:
- If park position switch error is detected, manual adjustable pedal operation cannot be performed when ignition switch turns ON.
- The displays of CAN communication and park position switch display error detecting condition from memory erase to the present on "TIME".
- If error is detected in the past and present error is detected, "CRNT" is displayed.
- If error is detected in the past and present error is not detected, "PAST" is displayed.
- If error has never been detected, nothing is displayed on "TIME".
- Any items other than CAN communication and park position switch count error detection frequency occurred after erase history to "1-127".
- If error was detected in the past, error detection frequency from memory erase to the present is displayed on "TIME".
- If error has never been detected, nothing is displayed on "TIME".
- Can clear the detected memory.
Normal: Clear memory in normal condition, history is erased and nothing is displayed on "TIME".
Error: Clear memory in error condition, error is detected again and "1" is displayed on "TIME".