Removal and Installation: Removal
WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the wheel and tire using power tool.
- Support the lower link using a suitable jack.
- Remove connecting rod upper joints from stabilizer bar using power tool. Refer to
"COMPONENTS ".
- Swing stabilizer bar down, repositioning it out of the way to access shock absorber lower mount.
- Remove the shock absorber lower bolt and nut using power tool.
- Remove the three shock absorber upper mounting nuts using power tool.
- Remove the coil spring and shock absorber assembly.
- Turn steering knuckle out to gain enough clearance for removal.