LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2036 (Transfer Case) >> ATX14B >> Trouble Diagnosis >> CONSULT-II Function (ALL MODE AWD/4WD) >> Self-Diag Result Mode >> Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform "CONSULT-II SETTING PROCEDURE". Refer to "CONSULT-II START PROCEDURE ".
  2. With engine at idle, touch "SELF-DIAG RESULTS". Display shows malfunction experienced since the last erasing operation.
    NOTE:
    • The details for "TIME" are as follow:
      • "0": Error currently detected with transfer control unit.
      • Except for "0": Error detected in the past and memorized with transfer control unit.

        Detects frequency of driving after DTC occurs (frequency of turning ignition switch "ON/OFF").

        Fig 1: Identifying CONSULT II SELF DIAG RESULTS Screen
        G04901461
scientia non olet · About LEMON Manuals