Diagnostic Procedure
WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK SYSTEM FOR 4WD SHIFT SWITCH
Perform trouble diagnosis for 4WD shift switch system. Refer to "4WD SHIFT SWITCH ".
OK or NG
OK: GO TO 2.
NG: Repair or replace damaged parts.
- CHECK SYSTEM FOR CLUTCH PRESSURE SWITCH
Perform trouble diagnosis for clutch pressure switch system. Refer to "CLUTCH PRESSURE SWITCH ".
OK or NG
OK: GO TO 3.
NG: Repair or replace damaged parts.
- SYMPTOM CHECK
Check again.
OK or NG
OK: Inspection End.
NG: GO TO 4.
- CHECK TRANSFER CONTROL UNIT
Check transfer control unit input/output signal. Refer to "TRANSFER CONTROL UNIT INPUT/OUTPUT SIGNAL REFERENCE VALUES ".
OK or NG
OK: GO TO 5.
NG: Check transfer control unit pin terminals for damage or loose connection with harness connector. If any items are damaged, repair or replace damaged parts.
- CHECK TRANSFER INNER PARTS
- Disassemble transfer assembly. Refer to "DISASSEMBLY AND ASSEMBLY ".
- Check transfer inner parts.
OK or NG
OK: Inspection End.
NG: Repair or replace damaged parts.