LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2036 (Transfer Case) >> ATX14B >> Transfer Assembly >> Disassembly and Assembly >> Inspection After Disassembly >> Sub-oil Pump

Sub-oil Pump

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the inner and outer circumference, tooth face, and sideface of the inner and outer gears for damage or abnormal wear.
  2. Measure the side clearance between the sub oil pump housing edge and the inner and outer gears.
  3. Make sure the side clearance is within specification. If the measurement is out of specification, replace the inner and outer gears with new ones as a set. Refer to "SUB-OIL PUMP ".

    Specification : 0.015 - 0.035 mm (0.0006 - 0.0014 in) 

    Fig 1: Measuring Side Clearance Between Sub Oil Pump Housing
    G04901700
scientia non olet · About LEMON Manuals