LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2033 (Tires, Wheels & Tire Pressure Monitoring System (TPMS)) >> Removal And Installation >> Transmitter (Pressure Sensor) >> Removal

Transmitter (Pressure Sensor): Removal

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove wheel and tire using power tool.
  2. Deflate tire. Unscrew transmitter retaining nut and allow transmitter to fall into tire.
  3. Gently bounce tire so that transmitter falls to bottom of tire. Place wheel and tire assembly on tire changing machine and break both tire beads. Ensure that the transmitter remains at the bottom of the tire while breaking the bead.
    Fig 1: Identifying Transmitter
    G04876605
  4. Turn tire so that valve hole is at bottom, and gently bounce the tire to ensure transmitter is near valve hole. Carefully lift tire onto turntable and position valve hole (and transmitter) 270 degrees from mounting/dismounting head.
    Fig 2: Identifying Position Of Valve Hole From Mounting Head
    G04899218
  5. Lubricate tire well, and remove top side of tire. Reach inside the tire and remove the transmitter.
  6. Remove the second side of the tire as normal.
scientia non olet · About LEMON Manuals