Terminals and Reference Values for Power Window and Door Lock/Unlock Switch RH
WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
TERMINALS AND REFERENCE VALUES CHART
| Terminal | Wire Color | Item | Condition | Voltage (V) (Approx.) |
|---|---|---|---|---|
| 3 | BR | Limit switch and encoder ground | - | 0 |
| 4 | W/R | Encoder power supply | When ignition switch ON or power window timer operates | 10 |
| 8 | L | Front power window motor RH UP signal | When power window motor is operated UP | Battery voltage |
| 9 | G | Front power window motor RH DOWN signal | When power window motor is operated DOWN | Battery voltage |
| 10 | Y | Battery power supply | - | Battery voltage |
| 11 | B | Ground | - | 0 |
| 12 | LB | Encoder pulse signal | When power window motor operates | |
| 15 | Y | Limit switch signal | Front power window RH is between fully-open and just before fully-closed position (ON) | 0 |
| Front power window RH is between just before fully-closed position and fully-closed position (OFF) | 5 | |||
| 16 | V | Power window serial link | When ignition switch is ON or power window timer operating |