Removal & Installation
WARNING: This page is about a different car, the 2003 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- Remove engine cover.
- Remove air duct with air cleaner assembly.
- Disconnect ignition coil harness connectors and harness brackets around ignition coil sides.
- Remove electronic throttle control actuator (when removing No. 4 cylinder spark plug only). See ELECTRONIC THROTTLE CONTROL ACTUATOR .
- Loosen ignition coil fixing bolts and pull out coil from rocker cover.
- Remove spark plugs.
- To install, reverse removal procedure.