Removal & Installation
WARNING: This page is about a different car, the 2003 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- A procedure for removal and installation of the electronic throttle control actuator is not provided by the manufacturer. For component location, see COMPONENT LOCATIONS .
- When installing electronic throttle control actuator tighten bolts in diagonal pattern to specification. See TORQUE SPECIFICATIONS .
- Perform the THROTTLE VALVE CLOSED POSITION LEARNING whenever the electronic throttle control actuator is disconnected. See THROTTLE VALVE CLOSED POSITION LEARNING .
- Perform IDLE AIR VOLUME LEARNING when the electronic throttle control actuator is replaced. SeeIDLE AIR VOLUME LEARNING .