Removal & Installation
WARNING: This page is about a different car, the 2003 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
A Crankshaft Position (CKP) sensor is installed into the oil pan. See COMPONENT LOCATIONS .
CAUTION:
Be careful with the sensor and avoid impacts such as from dropping. Keep sensor away from metal particles.
CAUTION:
Do not place sensor close to magnetic materials.
- Loosen the fixing bolt of the sensor.
- Disconnect crankshaft position sensor harness connector.
- Remove the sensor.
- To install, reverse removal procedure. Tighten attaching bolt to specification. See TORQUE SPECIFICATIONS .