Changing Transfer Fluid: Draining
WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- Stop engine.
- Remove the drain plug and gasket. Drain the fluid.
- Remove the ATX14B drain plug as shown.
- Remove the TX15B drain plug as shown.
- Install the drain plug with a new gasket to the transfer. Tighten to the specified torque. Refer to
"COMPONENTS
" (ATX14B),
"COMPONENTS
" (TX15B).CAUTION: Do not reuse gasket.