Mid Sun Gear, Rear Sun Gear, High and Low Reverse Clutch Hub: Disassembly

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Remove needle bearing and bearing race from high and low reverse clutch hub.

Fig 1: Identifying Needle Bearing And Bearing Race
Remove snap ring from mid sun gear assembly using suitable tool.
CAUTION: Do not excessively expand snap ring.

Fig 2: Identifying Snap Ring
Remove high and low reverse clutch hub from mid sun gear assembly.

Fig 3: Identifying High And Low Reverse Clutch Hub To Mid Sun Gear Assembly
1. Remove needle bearing from high and low reverse clutch hub.
  
  Fig 4: Applying Petroleum Jelly To Needle Bearing
Remove rear sun gear assembly from mid sun gear assembly.

Fig 5: Identifying Rear Sun Gear Assembly
1. Remove snap ring from rear sun gear using suitable tool.
  
  Fig 6: Identifying Snap Ring To Rear Sun Gear
2. Remove 1st one-way clutch from rear sun gear.
  
  Fig 7: Identifying 1st One-Way Clutch To Rear Sun Gear
Remove seal rings from mid sun gear.

Fig 8: Identifying New Seal Rings To Mid Sun Gear