High and Low Reverse Clutch: Disassembly

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Remove bearing race from high and low reverse clutch drum.

Fig 1: Identifying Bearing Race To High And Low Reverse Clutch Drum
Remove snap ring from high and low reverse clutch drum using suitable tool.
Remove drive plates, driven plates and retaining plate from high and low reverse clutch drum.

Fig 2: Identifying Snap Ring In High And Low Reverse Clutch Drum Using Screwdriver