High and Low Reverse Clutch: Assembly

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Install drive plates, driven plates and retaining plate in high and low reverse clutch drum.
CAUTION: Take care with order of plates.
Install snap ring in high and low reverse clutch drum using suitable tool.

Fig 1: Identifying Snap Ring In High And Low Reverse Clutch Drum Using Screwdriver
Install bearing race to high and low reverse clutch drum.
CAUTION: Apply petroleum jelly to bearing race.

Fig 2: Identifying Bearing Race To High And Low Reverse Clutch Drum