LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2020 (Power Steering System) >> Steering Wheel >> On-Vehicle Inspection and Service >> Checking Steering Wheel Turning Force

Checking Steering Wheel Turning Force

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Park vehicle on a level, dry surface and set parking brake.
  2. Start engine.
  3. Bring the power steering fluid up to adequate operating temperature. Make sure the fluid temperature is approximately 50° - 80°C (122° - 176°F).
  4. Tires need to be inflated to specified pressure. Refer to "TIRE ".
  5. Check steering wheel turning force using Tool when steering wheel has been turned 360° from the neutral position.

    Tool number : - (J-44372) 

    Steering wheel turning force : 39 N (4 kg-f, 9 lb-f) or less 

  6. If steering wheel turning force is out of specification, inspect the following:
  7. If steering column and power steering oil pump meet specifications, replace steering gear. Refer to "REMOVAL AND INSTALLATION ".