LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2015 (Engine Mechanical) >> Engine Room Cover >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove bolts using power tool.
  2. Lift up on engine cover firmly to dislodge snap fit mounts.
    CAUTION: Do not damage or scratch cover when installing or removing.
    Fig 1: Engine Room Cover Bolts And Torque Specification
    G04893977Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals