When Crankshaft and Connecting Rod are Reused
WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- Measure the connecting rod big end diameter. Refer to "CONNECTING ROD BIG END DIAMETER ".
- Make sure that the connecting rod big end diameter is within the standard value.
- Measure the crankshaft pin journal diameter. Refer to "CRANKSHAFT PIN JOURNAL DIAMETER ".
- Determine the grade of crankshaft pin journal grade by corresponding to the measured dimension in "Crankshaft pin journal diameter" column of "Connecting Rod Bearing Selection Table".
- Select connecting rod bearing of the same grade.
Connecting Rod Bearing Selection Table
CONNECTING ROD BEARING SPECIFICATIONS REFERENCE CHART
| Unit: mm (in) | |
| Connecting rod big end diameter | 57.000 - 57.013 (2.2441 - 2.2446) |
CONNECTING ROD BEARING SPECIFICATIONS REFERENCE CHART
| Unit: mm (in) | ||||
|---|---|---|---|---|
| Crankshaft | Connecting rod bearing | |||
| Crankshaft pin journal diameter | Grade (Mark) | Dimension (Bearing thickness range) | Bearing grade No. | Color |
| 53.968 - 53.974 (2.1247 - 2.1250) | 0 | 1.500 - 1.503 (0.0591 - 0.0592) | STD 0 | Black |
| 53.962 - 53.968 (2.1245 - 2.1247) | 1 | 1.503 - 1.506 (0.0592 - 0.0593) | STD 1 | Brown |
| 53.956 - 53.962 (2.1242 - 2.1245) | 2 | 1.506 - 1.509 (0.0593 - 0.0594) | STD 2 | Green |