Camshaft Bracket Inner Diameter
WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- Tighten camshaft bracket bolt with the specified torque. Refer to "INSTALLATION " for the tightening procedure.
- Measure the inner diameter "A" of camshaft bracket with bore gauge.
Standard:
No. 1 : 26.000 - 26.021 mm (1.0236 - 1.0244 in)
No. 2, 3, 4 : 23.500 - 23.521 mm (0.9252 - 0.9260 in)