Systems Controlled By IPDM E/R

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Lamp control
Using CAN communication lines, it receives signals from the BCM and controls the following lamps:
- Headlamps (High, Low)
- Daytime light relay control (Canada only)
- Parking lamps
- Tail and license plate lamps
- Front fog lamps
Wiper control
Using CAN communication lines, it receives signals from the BCM and controls the front wipers.
Daytime light relay control
Using CAN communication lines, it receives signals from the BCM and controls the daytime light relay.
Generator control
Using CAN communication lines, it receives signals from the ECM and controls power generation output.
Rear window defogger relay control
Using CAN communication lines, it receives signals from the BCM and controls the rear window defogger relay.
A/C compressor control
Using CAN communication lines, it receives signals from the BCM and controls the A/C compressor (magnet clutch).
Starter control
Using CAN communication lines, it receives signals from the BCM and controls the starter relay.
Cooling fan control
Using CAN communication lines, it receives signals from the ECM and controls the cooling fan relays.
Horn control
Using CAN communication lines, it receives signals from the BCM and controls the horn relay.