Inspection with CONSULT-II (Self-Diagnosis)
WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
If a CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on which control unit(s) carries out CAN communication.
- SELF-DIAGNOSIS RESULT CHECK
- Connect CONSULT-II and select "IPDM E/R" on the "SELECT SYSTEM".
- Select "SELF-DIAG RESULTS" on the "SELECT DIAG MODE" screen.
- Check display content in self-diagnosis results.SELF-DIAGNOSIS RESULT DETAILS
CONSULT-II Display CONSULT-II display code TIME Details of diagnosis result CRNT PAST NO DTC IS DETECTED.
FURTHER TESTING MAY BE REQUIRED.- - - No malfunction CAN COMM CIRC U1000 X X Any of items listed below have errors: - TRANSMIT DIAG
- ECM
- BCM/SEC
NOTE: The Details for Display for the Period are as follows:- CRNT: Error currently detected by IPDM E/R.
- PAST: Error detected in the past and stored in IPDM E/R memory.
Contents displayed
NO DTC DETECTED. FURTHER TESTING MAY BE REQUIRED.: Inspection End.
CAN COMM CIRC: Print out the self-diagnosis result and refer to "TROUBLE DIAGNOSES WORK FLOW ".