LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 201 (Engine Controls - Removal & Installation) >> Sensors & Switches >> A/C Switch >> Installation

A/C Switch: Installation

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. To adjustment the control cable follow following procedure.

  1. Attach temperature control cable.
  2. Rotate control knob to full cold position.
  3. Remove slack from cable and install temperature control cable clamp.

Fig 1: Removing Cluster Lid "C"
G00271475Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 2: Removing Cluster Lid "D"
G00271476Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 3: Removing Audio Unit
G00271477Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 4: Removing Temperature Control Cable
G00271478Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 5: Removing A/C Control Unit
G00271479Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals