Diagnostic Procedure No. 3: Procedure
WARNING: This page is about a different car, the 2001 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
Perform ignition key programming. See IMMU INITIALIZATION under PROGRAMMING. If initialization is not completed or fails, CONSULT message will be INITIALIZATION FAIL - THEN IGN KEY SW 'OFF' AND 'ON', AFTER CONFIRMING SELF-DIAG AND PASSWORD, PERFORM C/U INITIALIZATION AGAIN. Attempt to start engine. If engine starts, system is functioning correctly. If engine does not start, replace IMMU and perform initialization using CONSULT.