Diagnostic Procedure

WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

CHECK SHIFT SOLENOID VALVE A CIRCUIT
Perform "Diagnostic Procedure" for DTC P0750. Refer to DIAGNOSTIC PROCEDURE .

OK or NG
- OK : GO TO 2.
- NG : Repair or replace damaged parts.
CHECK MALFUNCTIONING ITEM
1. Control valve assembly. Refer to CONTROL VALVE ASSEMBLY .
2. Disassembly A/T. Refer to DISASSEMBLY .
3. Check the following item:
  - 2nd brake. Refer to OIL PUMP, 2ND COAST BRAKE & 2ND BRAKE .
  - 2nd coast brake. Refer to OIL PUMP, 2ND COAST BRAKE & 2ND BRAKE and ONE-WAY CLUTCH OUTER RACE SUB ASSEMBLY & 2ND COAST BRAKE HUB & ONE-WAY CLUTCH NO. 1 .
  - One-way clutch No. 1. Refer to ONE-WAY CLUTCH OUTER RACE SUB ASSEMBLY & 2ND COAST BRAKE HUB & ONE-WAY CLUTCH NO. 1 .
  - One-way clutch No. 2. Refer to DISASSEMBLY .
OK or NG
- OK : GO TO 3.
- NG : Repair or replace damaged parts.
CHECK DTC
Perform "DTC Confirmation Procedure". Refer to DTC CONFIRMATION PROCEDURE .

OK or NG
- OK : INSPECTION END
- NG : Replace control valve assembly. Refer to CONTROL VALVE ASSEMBLY .