Cylinder Head
WARNING: This page is about a different car, the 2002 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER HEAD
| Application |
Specification |
| Cylinder Head Height |
4.638-4.646 In. (117.8-118 mm) |
| Maximum Warpage |
.004 In. (.10 mm) |
| Valve Seats |
| Intake Valve |
| Seat Angle |
45°15'-45°45' |
| Seat Width |
.042-.053 In. (1.06-1.34 mm) |
| Seat Bore Diameter |
1.2402-1.2408 In. (31.500-31.516 mm) |
| Exhaust Valve |
| Seat Angle |
45°15'-45°45' |
| Seat Width |
.053-.064 In. (1.35-1.63 mm) |
| Seat Bore Diameter |
1.0433-1.0439 In. (26.500-26.516 mm) |
| Valve Guides |
| Valve Guide Cylinder |
| Head Bore I.D. |
| Standard |
.3730-.3739 In. (9.475-9.496 mm) |
| Service Limit |
.3813-.3817 In. (9.685-9.696 mm) |
| Valve Guide I.D. |
.2165-.2171 In. (5.500-5.515 mm) |
| Valve Guide Installed Height |
.453-.461 In. (11.50-11.70 mm) |
| Valve Stem-To-Guide |
| Oil Clearance |
| Intake |
.0008-.0020 In. (.020-.050 mm) |
| Exhaust |
.0016-.0028 In. (.040-.071 mm) |