Cylinder Block
WARNING: This page is about a different car, the 2002 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER BLOCK
| Application |
In. (mm) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Cylinder Bore | |||||||||
| Standard Diameter | |||||||||
| Grade 1 (1) | 3.1496-3.1500 (80.000-80.010) | ||||||||
| Grade 2 (1) | 3.1500-3.1504 (80.010-80.020) | ||||||||
| Grade 3 (1) | 3.1504-3.1508 (80.020-80.030) | ||||||||
| Out-Of-Round | Less Than .0006 (.015) | ||||||||
| Taper | Less Than .0004 (.010) | ||||||||
| Minimum Deck Height | (2) 8.4232-8.4271 (213.950-214.050) | ||||||||
| Maximum Deck Warpage | (3) .004 (.10) | ||||||||
|
|||||||||