LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (Engine Mechanical - 1.8L) >> Cylinder Head >> Inspection >> Camshaft Sprocket RUNOUT

Camshaft Sprocket RUNOUT

WARNING: This page is about a different car, the 2002 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install sprocket on camshaft.
  2. Measure camshaft sprocket runout.
    Fig 1: Measuring Camshaft Sprocket Runout
    G02007622Courtesy of NISSAN MOTOR CO., U.S.A.

    Runout (Total indicator: Limit 0.15 mm (0.0059 in) reading) 

  3. If it exceeds the limit, replace camshaft sprocket.