Intake Manifold

WARNING: This page is about a different car, the 2002 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Tighten in numerical order shown in the figure.
1. Tighten all bolts and nuts to 5 to 10 N.m (0.5 to 1.0 kg-m, 44 to 86 in-lb).
2. Finally tighten all bolts and nuts to 26 to 31 N.m (2.7 to 3.2 kg-m, 20 to 23 ft-lb).
Tighten all bolts and nuts to the final torque, evenly dividing the tightening into at least five steps.

Fig 1: Identifying Engine Front Side
Courtesy of NISSAN MOTOR CO., U.S.A.