LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 195 (Engine Mechanical) >> Cylinder Head >> Inspection >> Camshaft RUNOUT

Camshaft RUNOUT

WARNING: This page is about a different car, the 2002 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure camshaft runout at A and B as shown in the figure.

    Runout (Total indicator reading): 

    Limit 0.05 mm (0.0020 in) 

  2. If it exceeds the limit, replace camshaft.
    Fig 1: Checking Camshaft Runout With Gauge
    G02010574Courtesy of NISSAN MOTOR CO., U.S.A.