LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1914 (Exterior & Interior) >> Rear Parcel Shelf Finisher >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Rear Parcel Shelf Finisher
G02420501Courtesy of NISSAN MOTOR CO., U.S.A.
  1. Remove rear seat. Refer to "REAR SEAT ".
  2. Remove rear seat belt anchor bolts. Refer to "REMOVAL AND INSTALLATION OF REAR SEAT BELT ".
  3. Remove rear pillar finisher. Refer to "BODY SIDE TRIM ".
  4. Remove high mounted stop lamp and disconnect connectors.
  5. Remove halo trim.
  6. Remove rear parcel shelf trim.
    Fig 2: Removing Rear Parcel Shelf Trim
    G02420502Courtesy of NISSAN MOTOR CO., U.S.A.

Installation is in the reverse order of removal.