Symptom Chart
WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
PROBLEM SYMPTOM TABLE - AUTOMATIC DRIVE POSITIONER
| Symptom | Diagnoses / service procedure |
|---|---|
| A part of seat system does not operate (both automatically and manually). | 1. Sliding motor circuit inspection |
| 2. Reclining motor circuit Inspection | |
| 3. Front lifter motor circuit Inspection | |
| 4. Rear lifter motor circuit inspection | |
| 5. If the above systems are normal, replace the driver seat control unit. | |
| A part of door mirror does not operate (both automatically and manually). | 1. Mirror motor LH circuit check |
| 2. Mirror motor RH circuit check | |
| 3. If the above systems are normal, replace the automatic drive positioner control unit. | |
| A part of seat system does not operate (only automatic operation). | 1. Sliding sensor circuit inspection |
| 2. Reclining sensor circuit inspection | |
| 3. Front lifting sensor circuit inspection | |
| 4. Rear lifting sensor circuit inspection | |
| 5. If the above systems are normal, replace the driver seat control unit. | |
| A part of door mirror system does not operate (only automatic operation). | 1. Mirror sensor LH circuit check |
| 2. Mirror sensor RH circuit check | |
| 3. If the above systems are normal, replace the automatic drive positioner control unit. | |
| All the automatic operations do not operate. | 1. Detention switch circuit inspection |
| 2. Key switch and key lock solenoid circuit inspection | |
| 3. UART communication line circuit inspection | |
| 4. Tilt sensor circuit inspection | |
| 5. Telescopic sensor circuit inspection | |
| 6. If all the above systems are normal, replace the automatic drive positioner control unit. | |
| A part of seat system does not operate (only manual operation). | 1. Sliding switch circuit inspection |
| 2. Reclining switch circuit inspection | |
| 3. Front lifting switch circuit Inspection | |
| 4. Rear lifting switch circuit inspection | |
| 5. If the above systems are normal, replace the driver seat control unit. | |
| Seat function does not operate (only automatic operation). | 1. Seat sensor power supply and ground inspection |
| 2. Sliding sensor circuit inspection | |
| 3. Reclining sensor circuit inspection | |
| 4. Front lifting sensor circuit inspection | |
| 5. Rear lifting sensor circuit inspection | |
| 6. If the above systems are normal, replace the driver seat control unit. | |
| A part of door mirror does not operate (only manual operation). | 1. Door mirror remote control switch (change over switch) circuit inspection |
| 2. Door mirror remote control switch (mirror switch) switching circuit inspection | |
| 3. If the above systems are normal, replace the automatic drive positioner control unit. | |
| Only memory switch operation. | 1. Seat memory switch circuit inspection |
| 2. If the above systems are normal, replace the driver seat control unit. | |
| Seat memory indicator lamps 1 and 2 do not illuminate. | 1. Seat memory indicator lamp circuit inspection |
| 2. If all the above systems are normal, replace the driver seat control unit. | |
| The Entry/Exiting does not operate when door is opened and closed. (The Entry/Exiting operates with key switch) |
1. Front door switch LH circuit inspection |
| 2. If all the above systems are normal, replace the BCM. | |
| The key fob interlock function does not operate | 1. Key fob interlock function inspection |
| 2. If all the above systems are normal, replace the BCM | |
| Only seat system does not operate (only manual operation). | 1. Power seat switch ground circuit inspection |