Glass Lid: Installation
WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Position glass lid to sunroof assembly.
- Tighten glass lid assembly bolts to specification. (First tighten left front bolt, then tighten right rear bolt on glass lid to prevent lid from moving while tightening other bolts.)
Glass lid assmebly mounting bolts: 3.0 - 5.0 N.m (0.3 - 0.5 kg-m, 26 - 43 in-lb)
- Position and push trim into place.
- After installation, perform fitting adjustment.