Height Difference Adjustment

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Tilt glass lid up and down.
Check height difference between roof panel and glass lid and compare to "A-A" as shown in the figure above.
If necessary, adjust height difference by using one of the following procedures:

Adjust by adding or removing adjustment shim(s) between the glass lid and link assembly.
If glass lid protrudes above roof panel, add shim(s) or plain washers at sunroof mounting bracket or stud bolt locations to adjust sunroof as required.
Tighten glass lid mounting nuts.