Trouble Diagnoses Symptom Chart (With Front and Rear Power Window Anti-pinch System)
WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Check that other systems using the signal of the following systems operate normally.PROBLEM SYMPTOM TABLE - POWER WINDOW SYSTEM (W/ FRONT AND REAR ANTI-PINCH SYSTEM)
Symptom Repair order None of the power windows can be operated using any switch 1. BCM power supply and ground circuit check 2. Main power window and door lock/unlock switch power supply and ground circuit check 3. Power window serial link check Front power window LH alone does not operate 1. Front power window motor LH circuit check 2. Replace main power window and door lock/unlock switch Front power window RH alone does not operate 1. Front power window switch RH power and ground circuit check 2. Power window serial link check 3. Front power window motor RH circuit check 4. Replace BCM Rear power window LH alone does not operate 1. Rear power window switch LH or RH power and ground circuit check 2. Rear power window motor LH circuit check 3. Power window serial link check 4. Replace rear power window switch LH Rear power window RH alone does not operate 1. Rear power window switch LH or RH power and ground circuit check 2. Rear power window motor RH circuit check 3. Power window serial link check 4. Replace rear power window switch RH Anti-pinch system does not operate normally (Front LH) 1. Door window sliding part malfunction - A foreign material adheres to window glass or glass run rubber.
- Glass run rubber wear or deformation.
- Sash is tilted too much, or not enough.
2. Limit switch adjusting 3. Limit switch circuit check LH 4. Encoder circuit check LH Anti-pinch system does not operate normally (Front RH) 1. Door window sliding part malfunction - A foreign material adheres to window glass or glass run rubber.
- Glass run rubber wear or deformation.
- Sash is tilted too much, or not enough.
2. Limit switch adjusting 3. Limit switch circuit check RH 4. Encoder circuit check RH Anti-pinch system does not operate normally (Rear LH or RH) 1. Door window sliding part malfunction - A foreign material adheres to window glass or glass run rubber.
- Glass run rubber wear or deformation.
- Sash is tilted too much, or no enough.
2. Limit switch adjusting 3. Limit switch circuit check (rear LH or RH) 4. Encoder circuit check (rear LH or RH) Power window retained power operation does not operate properly 1. Check the retained power operation mode setting 2. Door switch check 3. Replace BCM Does not operate by front door lock assembly LH (key cylinder switch) 1. Front doorlock assembly LH (key cylinder switch) check 2. Replace main power window and door lock/unlock switch Power window lock switch does not function 1. Power window lock switch circuit check