Removal and Installation (without Rear Power Vent Windows): Installation
WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
- Install the glass from outside to insure that it is even with the top and bottom of the opening. Tighten side window front bolts to the specified torque.
- Glass bolts: 3.5 N.m (0.35 kg-m, 31 in-lb)
- Install rear side window latch bolts.
- Connect the antenna.
- Install rear pillar upper finisher. Refer to "BODY SIDE TRIM ".