Satellite Radio Tuner (Pre-Wiring)
WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
The satellite radio tuner pre-wiring allows connection of a satellite radio tuner.
Power is supplied at all times
- Through 20A fuse [No. 31, located in the fuse and fusible link box]
- To satellite radio tuner pre-wiring terminal 32.
With the ignition switch in the ACC or ON position, power is supplied
- Through 10A fuse [No. 4, located in the fuse block (J/B)]
- To satellite radio tuner pre-wiring terminal 36.
Ground is supplied through the case of the satellite radio tuner.
The satellite radio tuner pre-wiring allows connection of a satellite radio tuner.
Power is supplied at all times
- Through 20A fuse [No. 31, located in the fuse and fusible link box]
- To satellite radio tuner pre-wiring terminal 32.
With the ignition switch in the ACC or ON position, power is supplied
- Through 10A fuse [No. 4, located in the fuse block (J/B)]
- To satellite radio tuner pre-wiring terminal 36.
Ground is supplied through the case of the satellite radio tuner.
The satellite radio tuner pre-wiring allows connection of a satellite radio tuner.
Power is supplied at all times
- Through 20A fuse [No. 31, located in the fuse and fusible link box]
- To satellite radio tuner pre-wiring terminal 32.
With the ignition switch in the ACC or ON position, power is supplied
- Through 10A fuse [No. 4, located in the fuse block (J/B)]
- To satellite radio tuner pre-wiring terminal 36.
Ground is supplied through the case of the satellite radio tuner.