With Consult-II

WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch to "ON" position. (Do not start engine.)
Select "DATA MONITOR" mode for "A/T" with CONSULT-II.
Wait at least 6 seconds or start engine and wait for at least 6 seconds.

Fig 1: Consult-II - SELECT SYSTEM Display
Courtesy of NISSAN MOTOR CO., U.S.A.

WITH GST

Follow the procedure "WITH CONSULT-II".

Fig 2: Consult-II - SELECT DIAG MODE Display

Courtesy of NISSAN MOTOR CO., U.S.A.